What Does It Cost to Own a Baler?
Purchase price is a one-time number. What a baler costs to own gets decided every week. Where the money actually goes across seven cost buckets, plus a full preventive maintenance schedule for horizontal and two ram balers.
Read Post →
Baler vs. Compactor: Which One Does Your Operation Need?
A compactor lowers a cost. A baler creates revenue. How to tell which of your streams needs which machine, plus why a hauler's rebate on clean cardboard is a trade rather than free service.
Read Post →
Industrial Shredder Systems: How Shredding Before Baling Pays for Itself
The shredder is not a separate machine, it is the front end of your baling line. How shredding corrugated, paper, and plastics produces denser bales, ends infeed jams, and removes size limits on what you can process.
Read Post →
Best Balers for Industrial Manufacturers
Waste is a byproduct, not your business. How to match the machine to what your plant actually generates, from occasional cardboard to mixed streams with plastics, and take the labor out with conveyor and trim system integration.
Read Post →
Recycling Equipment for MRFs: How to Spec a Full Baling System
Why the baler is where every MRF investment pays off or bottlenecks. Sizing to peak sort line output, matching the infeed conveyor to the building, and the questions that separate a systems partner from a machine seller.
Read Post →
Balemaster Balers: E-Series, EO-Series & 5200 Overview
The Balemaster auto-tie lineup made simple: what separates the E-Series, EO-Series, and 5200 Series, the model number capacity decoder, and the new illumen.X monitoring system - from the authorized dealer 30 miles from the factory.
Read Post →
Vertical Baler: What It Costs, What It Bales, and Which Size Fits
The vertical baler is the entry point into baling - the lowest-cost machine class, fitting almost any building. What it costs, what it bales, how 60-inch and 72-inch models compare, and the honest signs your operation has outgrown one.
Read Post →
Scrap Metal Baler: Choosing the Right Machine for Non-Ferrous Processing
Non-ferrous scrap demands a baler built for it. This guide compares heavy-duty horizontal manual tie balers against two ram balers, covering the materials yards actually bale and how monthly volume drives the decision between the two.
Read Post →
Box Plant Recycling Equipment: Balers & Shredders
Which balers handle continuous corrugated trim, where shredders fit for scrap and product destruction, and how HMS ties equipment into your existing system.
Read Post →
Paper Baler: Choosing the Right Machine for High Grades, Office Paper, and Newsprint
Paper grades vary wildly in value, and a contaminated bale gets priced at its lowest grade. How to pick a baler that protects that value, from Balemaster E-Series machines to Excel two rams for tougher streams.
Read Post →
Corrugated Baler: How to Choose the Right Machine for OCC and Cardboard
The 40 to 50 tons per month threshold that separates closed-door balers from auto tie machines, why labor can override it, and how bale density drives your OCC revenue.
Read Post →
Why Baler Relines Matter: Protecting Your Machine
Liners are sacrificial by design. The two warning signs every baler owner should track, and why a deferred reline turns into a structural repair. HMS performs relines and rebuilds on-site.
Read Post →
Recycling Equipment for Distribution Centers: Reducing Cardboard Waste and Hauling Costs
A compactor gets your cardboard hauled for free, and pays you nothing. How a properly sized baler turns the same OCC into commodity revenue, with real payback math.
Read Post →
Baler Infeed Conveyor: What It Does, What It Costs, and Whether You Need One
Hand-loading a baler hopper costs labor every shift. The three conveyor types HMS installs, above-ground versus in-ground, and what to budget from used to new custom systems.
Read Post →
Horizontal Auto Tie Baler: How It Works, What It Costs, and Who It Is For
Inside the most widely used recycling machine in North America: how the auto tie cycle works, what new and refurbished machines cost, and which operations it fits.
Read Post →
Excel Horizontal Baler Models: EX and HV Series Specs and Who Each One Is For
All seven Excel horizontal models compared, from the entry EX62 to the foam-focused EX63F to the HV Series built specifically for non-ferrous metals.
Read Post →
Excel Two-Ram Baler Models: 2R63D, 2R9D, 2R10D, 2R12D Specs
Excel's full 2R Series compared, from the compact 2R63D to the 2R12D-XL built for the highest-volume MRFs, with manufacturer specs on every model.
Read Post →
Recycling Equipment Service and Repair in Indiana and Tennessee
Relines, hydraulic and electrical repair, PLC upgrades, PM programs, and emergency dispatch. HMS services all major brands whether or not you bought from us.
Read Post →
Used Baler for Sale in Indiana – What HMS Has in Stock
How buying a baler from HMS works: refurbished machines rebuilt in our Wanatah shop, as-is inventory you can inspect in person, and brokered machines sourced with real due diligence.
Read Post →
Two-Ram vs. Horizontal Auto-Tie Baler: Which Is Right for Your Operation?
For clean OCC, the horizontal auto tie wins on cost. For plastics, film, and mixed streams, the two ram's flexibility earns its premium. How to tell which side you're on.
Read Post →
How Much Does a Two Ram Baler Cost? A Complete Price Breakdown
Real 2026 numbers on new, refurbished, and as-is two ram balers, why main cylinder bore is the most important spec on the machine, and the ownership costs beyond the purchase price.
Read Post →
Cardboard Baler Buying Guide for Distribution Centers and Warehouses
Sizing a cardboard baler to your daily OCC volume, what to do about plastic film, why conveyor infeed matters, and realistic payback timelines for each machine class.
Read Post →
How to Choose the Right Baler for Your Recycling Operation
The four questions that narrow your baler choice by 80 percent before you ever talk to a dealer, plus recommendations by industry from MRFs to distribution centers.
Read Post →
New vs. Used vs. Refurbished Balers: How to Decide
What refurbished actually means versus used as-is, the real cost gap between all three paths, and a full inspection checklist before money changes hands.
Read Post →